CitybugBlog my107
More then 800 articles about the
I haven't done this but I got a question how to take the original Peugeot Radio out.
This was Posted a while ago on the 107 oc forum
1. Gently pull off the grey fan speed switch, it just pops out.
2. It will reveal a black self tapper screw with a Phillips head.
3. Remove screw.
4. Try and get you fingertips under the lip of the stereo/switch panel and pull gently towards you and slightly upwards. The complete panel including switches pops out. Dont yank it or prise it with anything, just use both hands and pull it gently towards you. It makes quite a "pop" when it come out.
5. Unplug the wiring from the stereo. There is a little retaining tab you press and they just pull out then.
6. Look from the inside at where the stereo goes through the panel and you will see the silver retainers for the stereo. Press them in, one side at a time, and the stereo slides out.
7.Refitting just requires you to reconnect wiring, and slide stereo back in. Then refit panel, it just pushes into place.
source
Rich. AKA Sergeant Bash,
Home of wheelygoodstuff
Labels: Car, Car Stereo, CityBug, How to, Mod, Peugeot 107, Reference
Having a problem with getting a new stereo in. The console panel, really doesn't want to come off. Have tried a bit too hard to be honest. Any ideas? Thanks.
have a look here:
http://my107.blogspot.com/2006/12/installing-3rd-party-radio.html
YOu see that there are 6 pins that go into the dashboard. Hope this helps.
G