CitybugBlog my107

LED in Heater button

Take the mid console front panel of.

You can use the wires that go to your Alarm button under your radio.
Red to the Green Grey wire , Black to White Grey wire.

Thx EJS for the pictures and building the light.

 

Labels: Lights, Mod

15 Comments:

1. Anonymous said...
   Monday, June 29, 2009 12:40:00 am  
   hay dude,
   i was wondering where you have wired the LED's off, cuz i like the idea.
   Guido said...
   Monday, June 29, 2009 12:53:00 am  
   Added extra pictures (thx EJS) and some instructions.
   Anonymous said...
   Thursday, November 19, 2009 2:22:00 am  
   What a great site! Very informative.
   
   Also interested in putting an LED to my heater control. What size of LED did you use, and how did you connect the wiring to the wires below the radio?
   Guido said...
   Thursday, November 19, 2009 3:26:00 pm  
   Don't know the size, but you can make the hole as big or as small as you want.
   
   Look at picture 4 to see how to connect it.
   Anonymous said...
   Thursday, November 19, 2009 3:50:00 pm  
   Thanks Guido for your help
   Anonymous said...
   Thursday, November 26, 2009 2:36:00 am  
   Trying to research how to fit the LED. However I ve tried to buy the red wire connectors to the radio wires. I ve noticed you can buy them the connectors with different AMPS. What amp do I need for the wire connectors?
   Anonymous said...
   Monday, January 18, 2010 7:14:00 pm  
   what a great site! This is the first 'mod' I have done to my 107, and it looks well cool! I have used a 3mm LED which is just right for the 'imprint' on the button. This 10 minute mod improves the heater control panel a lot - they should come with an LED from the factory! At least now I know what position the button is in at night time! Thanks Guido!
   Anonymous said...
   Sunday, April 18, 2010 6:05:00 pm  
   People!
   
   Plwease note you have to connect the cables to the wires connecting to the middle of the radio.
   
   Red does got the green grey wire,
   
   but the black ACTUALLY goes to the white grey wire BUT with the BLACK cable running through it.
   
   Luckily I studied the photos first before connecting.
   Anonymous said...
   Saturday, May 22, 2010 4:28:00 pm  
   When you didnt know where to get those fine cables, then cutt of a network patch cable ;)
   JPT said...
   Tuesday, August 03, 2010 8:52:00 pm  
   I soldered an LED to cables and tried to put them through the hole.... but there is the large plug behind the axle. Where exactly did you route the cables through the console?
   Anonymous said...
   Wednesday, November 28, 2012 7:59:00 pm  
   Hi its not as simple as it looks its took me 3 hours to get it to fit and im still not done i had to drill a hole in the heater part just to get the cable through , Also if you connect to the hazards is the bulb on all the time even when you turn the car off ??
   Unknown said...
   Wednesday, November 28, 2012 8:45:00 pm  
   Maybe you can use the + and - from your 12v supply this part is switched on the ignition.
   Anonymous said...
   Wednesday, November 28, 2012 8:51:00 pm  
   If you connect to the hazard light one benth the radio as the power is on constant this must mean that the light will shine all the time even when you turn the car off it will still be on
   Unknown said...
   Saturday, February 01, 2014 5:41:00 pm  
   Just completed this mod, looks great
   Unknown said...
   Monday, October 12, 2020 5:31:00 pm  
   pics are dead could you send em over please or something

Post a Comment